Quick start guide

Connect the iSAudioPlayer to the power supply using the mains plug supplied. The device will now start the application automatically.

Connect a LAN cable to connect the device to your network. Bring your PC into the default network of the device by using a free IP from the subnet 192.168.1.0/24 - avoid 192.168.1.200, which is the default IP of your new iSAudioPlayer.

Call up the default IP of the player in the browser to open the WebGUI, where you can make further settings and upload the content.

http://192.168.1.200/

The default access data are: Name: admin, PW: admin

Configure the necessary network settings under Settings. The name and password can also be changed here.

To output audio, connect an iSHearo handset or another speaker with a jack plug.

On the side of the device housing you will find four input contacts in a plug-in connection block to connect the reed contact of the iSHearo handset or push-button.

The inputs are potential-free and can each be used separately.

Settings Web GUI In the settings, you can also test the contacts of the connected hardware component(s) by opening or closing the reed contacts.

The state displayed in the idle state of the inputs provides an indication of the normal state of the contact (Normally opened or normally closed), which should be taken into account when creating the events.

Now load the desired audio files into the database via the Files page. (Attention: Never remove the micro SD card! Audio files cannot be written directly to the SD card).

Create a playlist containing the audio files under Playlists.

Create a first event via Events, e.g. to play your audio files. If the event has been assigned a function, this is started when the reed contact is triggered (e.g. when the iSHearo handset is lifted from its magnetic holder).